
242 WIN-PAK User Guide
3 The Machine Name can be found in the Win-
dows Control Panel by activating the Network
application and looking at the Identification tab.
4 It is generally not necessary to change the Proto-
col End Point. However, there are multiple
servers [Command File, Guard Tour, Scheduler,
Tracking and Muster], and each must have a
unique protocol end point [which can be any
number from 1024 through 9999]. Select a
number that is not used by another device on the
network and enter it into this field. The default
should work fine. Change this only if duplicate
protocol points exist.
5 Alarms with a higher priority (lower number)
than the setting entered in the Alarm Priority for
Notification field appear in the Event view.
6 Alarms with a higher priority (lower number)
than the Alarm Priority for required acknowledg-
ment setting appear in the Alarm view and must
be acknowledged before being cleared.
7 Select the Write Transactions to file check box
if you want a record of the server transactions
written to a file:
(C:\Program Files\WINPAK PRO\RSDUMP)
!WARNING! This option should only be selected and used for diagnos-
tic purposes. Deselect the Write Transactions to file
check box after use.
8 Indicate the Operating System used by the
server.
9 Create an ADV for the Communication Server,
by clicking the Add button in the ADV area of
the window.
10 Click the Next button to continue. The Com
Server Configuration - Ports window will be
displayed (next illustration).
Komentáře k této Příručce